408-287-4500

BUILT BY THE PROS FOR THE PROS

MANUFACTURERS

Aisin 09G MAXX FLUXX SOLENOID Bushing

Product Details

Solenoid Bushing Starter Kit w/ Reamer (.1585)

Includes 12 Bushings

Fits all VW09G, 09D, TF80-SC, and TF81-SC

Maxx Fluxx™ Bushings For Aisin Solenoids

 

  • Engineered by Valve Body Pro and is Pro-Proven
  •  
  • Minimal or No Adjustment Required
  •  
  • Maintains stable pressure at all temperatures
  •  
  • Fast adaptation or Re-learn

 

Our bushings are designed to make use of the maximum flux density produced by the solenoid. This allows a much stronger magnetic field that remains stable under a wide range of temperatures and conditions. The small amount of current used on these solenoids was taken into consideration in the design of Maxx Fluxx™. The high permeability with low coercivity of Maxx Fluxx™ allows rapid demagnetization to avoid “sticking” and results in much better solenoid performance. A Maxx Fluxx™ equipped solenoid performs better than a new OEM unit or any other aftermarket product available today. When set to factory specification, the need to adjust the solenoid is eliminated.

Valve Body Pro and Omega Machine & Tool has made available a solenoid opening and closing tool that puts money in your pocket. Now you can disassemble, clean and replace worn solenoid bushings in your transmission's solenoids. Now we have the bushings that are needed to repair the solenoids.There are two bushings in each solenoid.

 

These bushings are for the 09G transmissions. There are different bushings for the AW55-50SN transmissions.

 

If you're repairing a 09G you'll need 12 bushings. Our tool works with the 09G, 09D, AF21/TF81 & TF80 and AW55-50SN transmission pressure control solenoids.

 

Valve Body Pro 464 Perrymont Ave San Jose, CA 95125, USA

408-287-4500

sales@valvebodypros.com

© 2014 Valve Body Pros. All rights reserved.